Standard 2U 19" chassis to facilitate unified management and maintenance;
Prevent electromagnetic signal interference module group;
Chassis can be inserted up to 16 slots card-type Fiber Media Converter;
Each slot chassis supports hot-swap capability;
MTBF more than 50,000 hours;
Centralized management and centralized control room;
Ethernet fiber optic data centralized network management;
Support AC220V or DC48V power supply;
Warranty:3years
Introduction
MW-R16 Fiber Media Converter card-type chassis can supply power for multiple media converters module which will simplify the link and structure, it can work stably and adapt to a wide range of voltage. with good stability, large capacity, good integration and quality, it’s an ideal choice for various telecommunications projects.
MW-R16 supports hot swap, AC220V and DC48V dual power supply can be selected according to user needs, no need to unplug the converter, making it easy to manage and maintain.
Installation
● When you unpack this product package, please check the devices with packing list.
● Install the converter chassis in a standard 19inch cabinet and fix it.
● For 16 slots media converter chassis: Insert the card-type converter to the guide rails of the slot ,leaving the bigger side of the screws ahead .Make sure the power plug of card-type converter is inserted in power port of chassis. When the card-type converter is fully and firmly fit the chassis ,fasten the screws .Follow the above steps ,install all necessary card-type converters in the chassis, then block up any slots not for use temporarily.
● Insert the RJ45 twisted pair to the electrical port of converter, and insert the fiber to the fiber port of the converter. then connect the supplied AC to DC power adapter to the receptacle at the back of the chassis, attach the plug into a standard AC outlet with a voltage range from 100V to 260VAC or a DC outlet with a voltage of 48 VDC. Then turn the power switch on, the POWER LED Lamps in the chassis will on and at green color.( For 16 slots media converter chassis, POWER LED Lamps are in both front side and back side.) Then the fans began to work, that shows the power supply of the chassis is normal and stable. The LED Indicator Lamps of converters installed in chassis should indicate valid network connections and working status. Then the chassis began to work stably.
● If the chassis is with dual power supply, please turn on both two power supply, and they will work together. This will extend the life cycle of the power supply, and can make sure the chassis work normally in case one of them broken down.
